Parkside MoversGet a quote
Menu
← All blog posts

Appliance moving ·

How to prepare a refrigerator for a move

A step-by-step refrigerator moving checklist covering food, water lines, defrosting, measurements and safe transport planning.

By Parkside Movers · How these guides are prepared

Read the instructions for your model first

Refrigerators differ in size, door design, water connections and handling requirements. Find the model’s moving and installation instructions before disconnecting it. A general checklist helps you plan, but the manufacturer’s instructions should govern preparation and the wait before restarting after transport.

Measure the unit and the route out of the kitchen: doors, hallways, stairs, elevators and the truck access. Check the route at the new address too. Note whether doors would have to be removed by a qualified person to clear an opening.

Moving a dishwasher too? Plan disconnection and installation separately ↗

Empty, disconnect and dry

  • Use, donate or safely transfer perishable food before the move; plan insulated storage for anything you keep.
  • Turn off the ice maker and water supply, and disconnect the line according to the manufacturer’s instructions. Get qualified help if needed.
  • Unplug the unit and give a freezer time to defrost completely. Put towels down for meltwater and dry the interior.
  • Remove or secure shelves and drawers as instructed; pack loose parts so they cannot shift.
  • Protect the floor and secure the power cord and doors for transport without damaging the finish.

Pack pantry, refrigerated and frozen food safely ↗

Prepare a clothes dryer and arrange qualified gas disconnection ↗

Keep the transport plan upright

Whirlpool’s refrigerator guidance recommends keeping the unit upright to protect the sealed system. Use a suitable appliance dolly and secure it in the vehicle. Do not improvise a move through a tight stairwell with an appliance that exceeds the safe clearance or crew capacity.

After delivery, check the manufacturer’s instructions before reconnecting power or water. Guidance varies by model and by how the unit was transported. Allow it to reach operating temperature before restocking food.

What to tell your mover

Share the model dimensions, photos of the appliance and both routes, the floor at each end, and whether a water line is involved. Specify if disconnecting or reconnecting is already arranged; movers may not perform plumbing or electrical work. A clear plan helps the crew bring the right equipment and protect the property.

Parkside Movers can review an appliance move alongside a full household move or as a separate job. Include access measurements in your quote request.

See our appliance moving service ↗

Moving a washer too? Check water and transport-bolt preparation ↗

Prepare a stove or range and arrange qualified gas work ↗

Prepare a chest or upright freezer ↗

If the refrigerator is not moving, plan reuse or collection ↗

Planning a move?

Tell us what you need moved and share any access details for a quote.

Request a quoteExplore appliance moving ↗