Parkside MoversGet a quote
Menu
← All blog posts

Appliance moving ·

How to prepare a stove or range for moving in Ontario

Identify the fuel type, arrange qualified disconnection, remove loose parts, document the anti-tip system and plan professional installation after delivery.

By Parkside Movers · How these guides are prepared

Identify the exact appliance and every connection

Find the manufacturer, model number and installation manual. Confirm whether the appliance is electric, natural gas, propane or dual fuel, and whether it is freestanding, slide-in or built in. Photograph the controls, power connection, gas shutoff area, anti-tip hardware and surrounding cabinetry without pulling the range out yourself.

A wall oven or built-in cooktop is not the same moving scope as a freestanding range. Ask an appropriate installer to assess built-in units. Record the appliance dimensions and measure the complete route at both addresses, including counter clearances, doors, stairs, elevators and turns.

Compare preparation for a washer, dryer and refrigerator ↗

Arrange safe disconnection before the movers arrive

For a gas or dual-fuel range, do not treat shutting a knob as professional disconnection. TSSA says only registered fuel contractors and certified gas technicians may work on fuel-fired appliances in Ontario. Arrange qualified disconnection and later installation separately, and confirm that the appliance is ready before the moving crew arrives.

For an electric range, follow the manufacturer instructions and arrange qualified electrical work if the unit is hard-wired or the connection is uncertain. GE Appliances Canada's delivery guidance requires the old appliance to be empty and disconnected from electricity, gas and water hookups before removal.

Use TSSA's registered fuel-contractor search ↗

See Parkside's appliance-moving service ↗

Clean, cool and secure approved loose parts

Do not use the oven cavity as a packing box. Hidden objects add unpredictable weight and can damage the interior. Tell the mover about glass cooktops, warming drawers and other fragile or movable components.

  • Stop cooking early enough for every surface and component to cool fully.
  • Remove food, cookware and anything stored in the oven or drawer.
  • Clean loose grease and spills without dismantling the appliance beyond its manual.
  • Remove or secure racks, burner grates, caps and other parts as the manufacturer directs.
  • Pack model-specific hardware and instructions in a labelled parts container.
  • Secure the cord and protect the finish without taping directly to a sensitive surface.

Treat installation and the anti-tip device as separate work

Many freestanding ranges use an anti-tip bracket. Whirlpool instructs owners to verify that the bracket is secured to the floor or wall and that the range engages it. Moving the appliance means the system needs to be handled and checked during proper installation at the new location; do not simply push the range into place and assume it is secure.

After delivery, have the correct professional reconnect fuel or power, install or verify anti-tip protection, level the appliance and complete required checks under the model instructions. For a Parkside Movers quote, provide the model, fuel type, dimensions, route photos and confirmation that disconnection and installation are arranged.

Add access and appliance details to the moving quote ↗

Planning a move?

Tell us what you need moved and share any access details for a quote.

Request a quoteExplore appliance moving ↗