Identify the exact sectional configuration
Photograph the sectional assembled from the front, back and both ends. Count every module and record the overall width, depth and height. Note the left- or right-facing chaise, recliners, sleeper mechanism, power cables, storage sections, loose cushions and visible connectors. A product name alone may not identify the configuration.
Find the model number and manufacturer instructions before moving day. Some sections lift from brackets; others use clips, bolts, pins or power connections. IKEA, for example, places assembly documents on the product page and uses part codes for many replacement fasteners. Use the documents for the exact product rather than copying the way another sofa came apart.
Map every module and connector
Give each section a simple label such as A, B and C, then draw the finished order. Photograph the connection between modules before separating them. Put fasteners and approved tools in a labelled parts bag tied to the corresponding section or placed in a clearly identified hardware box.
Do not mix connector pieces with general household hardware. Do not force a module that still has a hidden bracket or powered connection. If a sleeper or recliner mechanism requires specialist service, arrange that separately and tell the mover which sections are ready to handle.
Measure after the approved preparation
Removing a foot or cushion can change the required angle, but do not remove a structural or mechanical part just to make a measurement work. Compare the module's three dimensions with the real route and identify the turn it must make. A doorway wider than the sofa's smallest number does not prove the turn is possible.
- Measure each prepared module at its widest, deepest and tallest points.
- Add the thickness of fitted covers or other rigid protection.
- Check the narrowest doorway with the door in its usable position.
- Measure stair width, landings, railings, ceiling height and tight turns.
- Confirm elevator door, cab and booking limits.
- Photograph both routes and disclose long carries or restricted parking.
Protect the upholstery and use a coordinated carry
Vacuum loose debris and identify existing stains, tears or weak seams. Use protection appropriate to the upholstery, keeping tape and adhesive off finished surfaces. Secure moving parts without loading a recliner handle, cable or connector. Keep the path clear before a module is lifted.
CCOHS recommends help or mechanical aids for heavy and awkward loads. Agree on commands, grip points and the destination before lifting. A large section should not block a handler's view of stairs. Never suspend a module from upholstery, an arm cap or a mechanism that was not designed as a carrying point.
Reassemble from the recorded plan
Place each module in its destination room before removing protection. Inspect the upholstery, feet, brackets and cables, then follow the manufacturer's sequence. Do not substitute random screws or force misaligned connectors. Test powered or moving features only after the sectional is correctly assembled and clear of the moving route.
For a Parkside Movers quote, send the overall configuration, module count, model if known, photos of connectors and both access routes. State whether disassembly and reassembly are requested or whether the sectional will be ready as separate modules.
Planning a move?
Tell us what you need moved and share any access details for a quote.
Request a quoteExplore furniture moving ↗