Identify the television before taking anything apart
Record the brand, model, screen size, stand type and outer dimensions. Photograph the powered-on picture if practical, then the screen, corners, rear panel, ports and any existing marks after shutdown. Find the manufacturer's manual for that exact model; a television's stand, wall mount and approved handling points vary.
Decide whether the TV is moving, staying or being discarded before packing begins. Toronto treats unwanted televisions as electronic waste, not ordinary garbage or Blue Bin material. If the set will not move, erase personal account access where possible and use the City's current electronic-waste instructions.
Prepare unwanted electronics and personal data for a clear-out ↗
Disconnect and label the setup
Turn the TV off, allow it to cool and disconnect power and accessories according to the manual. Photograph the cable layout, then label cables by device and port. Pack the remote, approved screws, stand parts and manual in a clearly marked accessory container; remove batteries from a remote only when the product instructions support it.
A wall-mounted television needs a separate removal plan. Confirm who is authorized to detach the screen and what happens to the wall bracket. Do not let the screen hang from one fastener or ask a mover to improvise around concealed wiring. Wall repair and electrical work are separate scopes.
Use a box and protection suited to the model
Canada Post's guidance recommends a rigid outer container, individual wrapping, cushioning and void fill. Those are useful general principles, but a household move is not parcel shipping and a TV needs model-specific protection. Do not create a tight package by pressing foam, blankets or tape directly against the display panel.
- Use the original manufacturer packaging when it remains complete and sound.
- Otherwise use a correctly sized television carton or purpose-built packing system.
- Keep rigid protection and cushioning away from direct pressure on the screen surface.
- Fill permitted voids so the protected television cannot shift inside the carton.
- Keep stand parts and sharp hardware from contacting the screen or cabinet.
- Mark the package with its TV number, destination room and approved orientation.
Measure the protected TV and the complete route
Measure after packing, not only the bare screen. Check doors, elevators, stair turns, ceiling height and the legal loading point at both addresses. Large televisions behave like awkward sheet material, so do not lift one alone or carry it where the screen blocks the handler's view.
CCOHS recommends using help and suitable handling methods for awkward sheet material. Keep the package stable, prevent twisting and secure it in the vehicle so it cannot fall or accept the weight of other items. Follow the manufacturer's transport orientation rather than applying one rule to every display technology.
Inspect before reconnecting
At delivery, place the carton in a dry, protected location away from the active carry route. Inspect the outer package and the set as it is unpacked. If the TV is wet, cracked or visibly damaged, do not power it; keep the packaging and obtain appropriate manufacturer or service advice.
For a Parkside Movers quote, provide the model, screen size, stand or mount details, packing status, access photos and whether detachment is already arranged. Confirm whether the booking includes packing or transport only. Keep the remote and small hardware traceable through the moving inventory.
Planning a move?
Tell us what you need moved and share any access details for a quote.
Request a quoteExplore furniture moving ↗