Identify the exact unit and who may remove it
Record the make, model, serial number, dimensions and weight. Photograph the installed unit, window opening, bracket or sleeve, hose, drain location and electrical connection before anything is loosened. A portable unit with an exhaust hose, a window unit resting on a support and a built-in through-wall unit require different work. The model manual, building rules and rental agreement determine what may be removed and by whom.
A window unit can fall outward if the last fastener is released while nobody supports its weight. Do not treat removal as an ordinary lift from a shelf. Arrange a qualified installer or the building's approved person where required. Parkside Movers can review transport after a unit is safely removed and prepared; installation and electrical work are separate unless explicitly agreed.
Drain and dry according to the manual
Turn off and unplug the unit, then follow its manual for water removal and drying. LG's portable air-conditioner storage guidance says to drain remaining condensate and securely replace the drain plug to prevent leaks. It also describes a fan-mode drying step for the covered models; do not assume that exact procedure applies to another brand or design.
Collect water in a suitable container and protect floors. Keep fingers away from sharp metal edges and do not open the sealed refrigerant system. If a unit leaks an unknown fluid, has damaged wiring or cannot be safely disconnected, stop and get appliance or HVAC advice before loading it.
Pack the equipment as separate labelled parts
A carton or wrap should protect the unit from impact without trapping moisture against it for extended storage. Keep a photo of the assembled window kit so it can be identified at the destination. If the next window size or electrical supply is different, do not assume the old kit can be reused.
- Bag and label screws, brackets, window panels and manufacturer-approved loose pieces.
- Protect the grille, controls, fins and corners without blocking a drainage opening that is still wet.
- Keep the power cord secured without pinching or sharply bending it.
- Do not lift a unit by its hose, louvers or plastic front panel.
- Use the model's permitted orientation for carrying and transport.
- Record what belongs to the landlord or building before removing a sleeve or bracket.
Measure the route and plan the next installation
Measure the unit and both carrying routes, including window height, stairs, elevator, door and truck access. Tell the mover the actual prepared weight and whether the item is a loose portable unit or a removed window unit. Keep it stable in the vehicle and away from boxes that could press on the grille or controls.
At the destination, follow the owner's manual for placement, any waiting period and installation. Confirm that the window, support, outlet and building permission are suitable before scheduling a technician. A moving appointment does not certify the installation or guarantee the unit will fit the new home.
Request an appliance-moving quote ↗
If the unit is unwanted, check appliance reuse and collection ↗
Planning a move?
Tell us what you need moved and share any access details for a quote.
Request a quoteExplore appliance moving ↗