Parkside MoversGet a quote
Menu
← All blog posts

Family moving ·

Moving a bunk bed or loft bed in the GTA: disassemble, label and safety-check it

A bunk bed should be rebuilt to its model instructions, not guessed together after a move. Plan the route and recheck rails, ladder and mattress fit.

By Parkside Movers · How these guides are prepared

Decide whether the bed is fit to move

Identify the make and model and download its assembly guide before taking anything apart. Photograph the bed from each side, including the ladder, rails, slats, bolts and any wall attachment. Inspect for cracked boards, bent metal, damaged welds or missing fasteners. Health Canada advises avoiding do-it-yourself fixes and replacing missing parts with manufacturer parts for second-hand bunk or loft beds; that is equally sensible before a rebuild.

Measure the longest frame piece and the complete route at both homes. A bunk may have to be fully disassembled for a stair turn or condo elevator. Do not promise that a tall assembled unit can be carried through a narrow hallway.

Health Canada's bunk and loft bed safety guidance ↗

General bed-frame hardware checklist ↗

Keep the exact parts in order

If the instructions or required original fasteners cannot be found, pause the reassembly rather than substituting hardware by appearance. An apparently stable bed can still have an unsafe rail or support connection.

  • Remove mattresses and bedding and pack them separately.
  • Photograph each connection before removing the ladder, guardrails and frame pieces.
  • Label rails, slats and matching hardware bags by position; do not mix them with another bed's bolts.
  • Protect long pieces from bending, and keep small fixings with the labelled furniture.
  • Follow the manufacturer sequence for disassembly and later reassembly; arrange help for awkward lifts.

Find IKEA Canada assembly guides where applicable ↗

Recheck safety before anyone sleeps in it

At the destination, rebuild on a suitable level floor using the original instructions. Check the ladder attachment, slats, bolts and guardrails. Health Canada calls for guardrails on all four sides of the top bunk, even against a wall, and says the mattress must fit snugly; the rail tops should be at least 12.7 cm above the mattress. It also says children under six should not use the upper bunk. Recheck the actual product label for its allowed mattress size and thickness.

Ask Parkside to state whether disassembly and reassembly are in the quote. A child should not use the bed until a responsible adult has completed the manufacturer's final inspection and any required anchoring.

Review furniture delivery and assembly scope ↗

Plan a child-friendly moving day ↗

Planning a move?

Tell us what you need moved and share any access details for a quote.

Request a quoteExplore furniture delivery and assembly ↗